3941 Holcomb Bridge Road, Second Floor 200
Peachtree Corners, GA. 30092
Insulated Roof Panel Systems
Universal Steel of America can design and price your metal building system to increments of the nearest 1/16 of an inch and to comply with most common building codes. Each is designed by professional, experienced engineers and manufactured to exacting tolerances under rigid quality controlled plant conditions. Call us today to explore your Roof Panel options at 1-800-993-4660 or Contact Us.
Our Steel Thermal Metal Roofing Panels
Standing Seam
Clear span gabled rigid frames with variable depth columns and rafters, with ridge at centerline of frame.
Universal Steel of America’s Standing Seam is a 24″ wide panel with a standing rib which is machine double lock seamed 2 7/8″ above the drainage surface. The system’s two piece sliding clips connect the weathering surface to the structure, eliminating panel to structure fastener penetrations and allowing the weathering surface to move with temperature changes, thereby resisting thermal shock. High energy efficiency is achieved with concealed clip standoff design which minimizes compression of the insulation. With 6 inches of fiberglass insulation an R-value of 17.29 can be attained. The system’s heavy 22-gauge or 24-gauge steel materials with long life coating and Underwriters Laboratories class 90 rating for wind uplift resistance reduces maintenance costs. Shell white is standard, but all other colors are available as special order.
PBR
Universal Steel of America’s PBR is a 36″ wide panel with 1 1/8″ high ribs on 12″ centers. It is available in 24-gauge and 26-gauge steel. The 80,000 pound per square inch yield enhances walkability, resistance to hail damage and load carrying capacity.
The purlin bearing leg design makes panel alignment and fastener engagement consistent. Tape sealant at panel laps prevents water migration and air infiltration. Dura-Rib fasteners are coated with an organic material that tests seven times more resistant to rust than the typical .0003 cadmium-zinc coated fasteners. The system has both 30 and 90 classification from Underwriters Laboratories, Inc., for wind uplift resistance. Shell white is standard, but all other colors are available as special order.
Insulated Panel System
Universal Steel of America’s thermal roof panels are designed for use in industrial, commercial, new or re-roof applications where speed of erection, light weight and thermal efficiency are required.
Insulated Panel Systems is a 40″ factory-insulated sandwich roof panel system comprised of a polyurethane foam core between a 26-gauge, ribbed, stucco embossed exterior skin and a 26-gauge, grooved interior skin.
Available in thicknesses from 1″ to 5″, U-factors of up to 0.024 (R-42.2) can be achieved. Ten colors available.
Architectural Standing Seam Lok
Architectural Standing Seam Lok
Architectural Lok is Universal Steel of America’s new Architectural Standing Seam Roof Panel. It is available in a 2″ vertical rib in 16 widths. BattenLok HS has both fixed and floating clips. The panel’s heavy 24-gauge steel material with long-life coating and Underwriters Laboratories class 90 rating for wind uplift resistance reduces maintenance costs.
Universal Steel’s Manufacturing Facilities
Ask for a Quote on a Prefab Commercial Building or Warehouse
With our expertise in metal building kits, Universal Steel of America is paving the way, making pre-engineered steel buildings far more popular, more economical and less time consuming to construct than traditional commercial building construction.
Time and time again, our buildings perform better and outlast any wooded structure.
For more information about pre-engineered commercial steel buildings or any of our prefab steel building products, please contact our building specialists:
